Jabra GN9120 Bedienungsanleitung PDF herunterladen (Seite 6)

3. Remote handset lifting functionality

Answering and making telephone calls with GN1000

You may purchase a GN1000 as an accessory, which lets you answer

and end telephone calls while away from your desk. Please contact

your vendor or visit www.jabra.com for further information.

To answer a call using the GN1000 or electronic hook switch

functionality:

1. Remove the headset from the base unit when you receive a call.

The link will be established and the on-line indicator on the front

of the base unit will begin to ﬂash.

Note

: If you are already wearing the headset, you will be notiﬁed of incoming calls with a ringtone in your

headset. To accept the call, press the multifunction button once.

To end the call, press the multifunction button again.

Making telephone calls using the GN1000 or electronic hook switch functionality:

To make a telephone call using the GN1000:

1. Remove the headset from the base unit. The link will be established and the on-line indicator on the

front of the base unit will begin to ﬂash.

2. Dial the desired number. To end the call, press the multifunction button momentarily or place the head-

set in the base unit.

Note: The connection cord must be connected to your telephone’s handset port (not the headset port)

in order for the GN1000 to function.

GN9120/GN9125 with Electronic Hook Switch (EHS)

The GN9120/GN9125 comes in versions which enables you to answer and end calls while away from your

desk – without using the GN1000. This is, however, only possible on certain telephone systems.

In order to determine which telephones have the EHS feature enabled, please refer to our website

www.jabra.com. Please also refer to your telephone’s user manual for clariﬁcation.

3 modes are available:

• TheMSHinterface(Alcatel)

• TheRHLinterface(non-EHS;workswiththeGN1000)

• TheDHSGinterface(forexample,withSiemensandElmegdesktelephones)

How to switch between the RHL, DHSG, and MSH interface modes:

1. Place the headset onto the base. Make sure that the base display is turned towards you.

2. With the headset resting on the base, press the

volume control keys „+ and -„ simultaneously (hold

approx.6-8seconds),untiltheredOnlineindica-

tor on the headset starts to ﬂash rapidly.

3. You are now in interface switching mode, and can

set the GN9120/GN9125 to work with your tel-

ephone’s interface.

Now you may use the „+ and -„ volume control

keys to move between the individual software

modes. The base unit’s 3 indicators show which

interface the GN9120/GN9125 is in. See the illus-

tration to determine the type of interface.

RHL DHSG

Link icon

Mute icon

Volume button

– +

MSH

Visual indicator (red)

1 2 3 4 5 6 7 8 9 10 11 ... 74 75

Kommentare zu diesen Handbüchern

Keine Kommentare

Jabra GN9120 Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern